Sunday, September 23, 2012

Light Series 3


































For this light series I chose Daylight, Compact Fluorescent, HID High-Pressure Sodium, Fluorescent, and Mr-16 to compare my fabric samples with.  I wanted to use fabrics with different colors, patterns, and textures in order to get the various changes on camera.

Daylight obviously had the best color range and really brought out the the hues in all of the fabrics.  The brightness of it also had the added affect of bringing out the textures fairly well.  I consider daylight to be the standard at which the other sources can be compared to.

The CFL lighting was warm and gave a golden tone to the fabrics.  The green and yellow rendered well within this light, but the red and blue were change from their original hue.

The street light with HID Sodium lamps applied the most dramatic visual affliction to the fabrics.  Everything appeared either orange or a sickly yellow.  Needless to say high-pressure sodium lighting is not suitable for visual clarity in design.

These particular Fluorescent lamps had a white light a bit on the warm side.  It rendered the colors just alright on the fabrics, but not as well as daylight.  Also for some reason the blue swatch gained an orange appearance under this lighting.

The Mr-16 lighting was strong and bright, but it left the colors in the fabric washed out.  This source would be appropriate if the need was simply to illuminate and colors were not important, but as designers colors should always be considered important in an interior space.

Saturday, September 22, 2012

Interior Light Model: Mixing Light


Light Mixing
Light Bo
The principle behind our light box was to create an area that displayed the primary colors of light, the secondary colors of light, and also white light at the same moment.  We were able to accomplish this by setting up barriers which restricted the path of our light sources (red, green, and blue lamps) so that they interacted and mixed in a very specific way.  The barriers allowed the red, green, and blue light to be shown whilst also having them mix to create yellow, magenta, and cyan in certain locations.  Finally in the center all of the light emitted mixed to create the visible white light. 

Our lamps were Christmas tree lights which we rearranged.  Originally all of the lamps were used, but later we adjusted the number to make the amount of emitted light about equal.  The colors on the exterior of our box represent the exact color which shines on the interior of the same wall and help to light proof inside.  The shape of the box represents a quartz prism used to fracture light and worked perfectly for our desired design.

Light Box Poster

Tuesday, September 18, 2012

Scavenger Hunt: Illuminance, Reflectance and Transmittance

Illuminance

8.8 fc  Studio Sink
11.7 fc  4th Year Studio
20.6 fc  Pinup Space
36.2 fc  Lab
48.4 fc  Room 204
53.2 fc  Critique Room
76.1 fc  Studio Window
163.1 fc  Desk Lamp

Reflectance

4% = 1.4/31.4 Screen Cover
30% = 9/30.2 Desk
57% = 11.4/19.7 Metal Frame
65% = 11.2/18.2 Whiteboard
94% = 18/20.2 Mirror

Transmittance

0% = .3/242  204 Shades
28.5% = 12.7/44.5  Paper
42% = 13.2/31.2  Screen Cover
76% = 540/710  Light Box
92% = 23/24.9  Glass

Thursday, August 30, 2012

Light and thy Effects on Human Experience



Matthew Weikert
Light and thy Effects on Human Experience

            Often when an observed atmosphere is discussed, whether it be designed or natural, light is one of the main concerns.  Atmosphere inside, outside, or in any space is directly linked with its light because fundamentally we cannot perceive without it.  But from human experience we know that light is not the same everywhere, and could never be unless highly influenced.  Light differences define a place’s purpose, a person’s behavioral response, and how we artificially perceive time.
            The most basic and yet complex origin of light is from nature.  Bioluminescence, thermal sources, chemical reactions, and solar energy (to name a few) were there from the beginning and are still some of the hardest to control and comprehend when it comes to their light properties.  Sunrises, for example, are quite often studied in many respects such as photography, cinematography and even literature, but no two are ever the same as the reading extrapolates to us.  The same event can even differ greatly a few yards away not to forget about what diverges with different climate, altitude, latitude, air particle level, time, local flora, soil & water color and humidity.  There are sure to be hundreds of differing considerations that change our perception. 
            One of the most memorable sunrises of my life was on the Aegean Sea.  I awoke just before dawn on a ferry my group boarded the night before in Italy.  Unfortunately for them I was the only one awake to witness the sun rise above the sea and shine onto the clouds before we docked in Greece.  Although I was tired and the day had just begun, I knew as far as human experience was concerned that few would have the opportunity to witness something this selectively special and even less would appreciate it for that reason.

            To better understand what occurred out there we could analyze the situation by breaking it down into unknown factors and all that had to transpire for that particular experience.  Most importantly the time was correct; a later or earlier transport would have rendered the whole occurrence null.  The climate of the Mediterranean was brisk at the time, but relatively steady winds and a storm from the night before kept the air clear until it hit higher altitudes where some clouds remained.  Positioned around the 36 degree latitude we were about halfway between the equator and the North Pole so the light angle would not have been the strongest, but at sunrise the difference is minimal.  At sea level the full spectrum of the sun could be absorbed and then visually doubled due to the mirroring of the water’s surface. 
            All of these factors lent themselves to this one perception.  Any difference and the light would have changed, the experience would have changed.  An infinite number of differing experiences could have been had.  But what does another experience matter?  It all depends on the final relationship of task.  The most important task in life to me personally is to experience and enjoy those experiences.  The light in this instance helped me accomplish that goal.

A Healthy Glow



Matthew Weikert
A Healthy Glow

            It’s an interesting vantage point to view light as something other than an element in design.  The farthest past that basic knowledge which we have explored was only how light effects behavior or how it can define a social interaction in a given environment.  But now layered on top of everything else is this knowledge of how light can influence health and safety.
            Safety is one of the most logical and practical applications for light.  In any work environment for ample light is needed to see to perform tasks efficiently and without risk.  Lights can be used to highlight certain areas of precaution or importance as well as indicate information that may assist with safety.  Good lighting could also be used to ensure mental safety as well.
            The main influence of these articles however was the underlying applications of certain light and how that pertained to health.  Back at the workplace, light can be used to ensure enough vitamin D is absorbed as well as keep the proper circadian cycles in place.  In hospitals and at home the light can be adjusted to increase immune systems and to assist with sleeping.  Into the future light can be deconstructed more to find better health benefits and more unique uses such as blue light to help long term focus. 
            With the introduction of artificial light and the disruption of our natural cycles we have been hindered mentally and health wise.  But as the articles state with recent and future findings we may benefit into the future much more than we have in the past.

Thursday, August 23, 2012

Lighting Scavenger Hunt


This fluorescent lighting gave a uniform and very bright glow to this location.  Although the area had high clarity and appeared open due to the light, the space was also tense and unpleasant.

The interior space here was nicely lit with non-uniform, dim to medium lighting which gave it an intimate appeal.  These lamps provided a slightly unfocused source which brought the space together, making it relaxed and pleasant.